Non-Combustible Soffit Panels for Commercial Projects
Fire, acoustic and thermal performance in one finished system
Aspect Vivid uses a non-combustible Terrawool volcanic stone core and has been tested to relevant Australian fire standards.
Its sound-absorbing construction helps control reverberation beneath concrete floors and other hard building surfaces, while the insulated core supports the thermal performance of the building envelope.
Unlike exposed rigid insulation, Aspect Vivid arrives fully sealed and pre-finished. The bevelled perimeter creates clean, consistent panel lines across the completed soffit.
Key benefits
- Non-combustible core tested to AS 1530.1
- Tested Fire Resistance Level of -/60/30 to AS 1530.4
- Group 1 face tested to AS 3837 and AS 5637
- Acoustic absorption to help reduce reverberation
- Thermal insulation across multiple thickness options
- Fully sealed and pre-finished panel
- Bevelled edges for a defined architectural finish
- Highly resistant to moisture and humid conditions
- Lightweight construction for easier handling
- Light-reflective white finish designed to optimise available light
- Available in a range of pre-finished colours
- Low VOC and formaldehyde emissions
- Global GreenTag certified
Acoustic and Thermal Soffit Insulation
Better performance beneath exposed concrete floors
Concrete soffits and other hard surfaces can reflect noise and contribute to uncomfortable sound levels. Aspect Vivid introduces an absorptive surface that helps reduce reverberation and improve acoustic comfort in covered external and semi-exposed areas.
The panel also provides thermal insulation without requiring a separate exposed finish. This makes it easier to address acoustic, thermal and visual requirements with one coordinated system.
Aspect Vivid Panel Sizes and Thermal Performance
Standard options for different project requirements
Aspect Vivid panels are supplied in a standard size of 1200mm × 600mm. Each panel has a 10mm × 5mm bevel around its perimeter.
| Panel thickness |
Approximate weight |
Winter R-value at 15°C |
Rated R-value at 23°C |
Summer R-value at 30°C |
| 60mm |
5.18kg |
1.68 |
1.62 |
1.56 |
| 75mm |
6.48kg |
2.11 |
2.02 |
1.95 |
| 100mm |
8.64kg |
2.81 |
2.70 |
2.60 |
| 120mm |
10.37kg |
3.37 |
3.23 |
3.12 |
Panel thickness and system configuration should be selected according to the project’s thermal, acoustic, fire and installation requirements.
Fire and Moisture Performance
Built for demanding soffit applications
Aspect Vivid has a core tested as non-combustible under AS 1530.1, a Group 1 face and a tested system Fire Resistance Level of -/60/30.
Testing under high-humidity conditions produced a total mass increase of only 0.33%. This makes the panels highly resistant to humid conditions while maintaining their appearance and thermal and fire properties.
The tested ratings apply to the relevant system configuration. Always refer to the current technical and installation documentation when specifying or installing the product.
A Clean, Pre-Finished Soffit
Insulation that contributes to the finished design
Aspect Vivid does more than cover the underside of a slab. Its sealed face and bevelled edges create an intentional architectural finish suitable for areas where the soffit remains visible.
The standard white coating is designed to diffuse and optimise available light without excessive glare. Concrete grey and other pre-finished colour options may also be available, allowing the soffit to complement the wider project design.
Typical Aspect Vivid Applications
Designed for protected external ceilings and soffits
Aspect Vivid may be suitable for:
- Commercial and public building soffits
- Apartment and mixed-use developments
- Covered building entrances
- Protected walkways and external circulation areas
- Undercrofts and covered communal spaces
- Areas beneath concrete floor slabs
- Projects requiring combined fire, acoustic and thermal performance
- Architectural soffits where exposed insulation is not suitable
Project-specific suitability should be confirmed against the building design, installation environment and required performance criteria.
Aspect Vivid Installation
A lightweight system with a defined tile finish
Aspect Vivid panels can be installed using adhesive and mechanical fixings to a suitable concrete substrate or fixed to top hat sections.
The correct fixing method, substrate preparation, perimeter treatment, penetrations, trims, flashing and weatherproofing details must follow the current Aspect Vivid installation guide and project specification.
Global GreenTag Certified Soffit Panels
Supporting healthier and more sustainable specifications
Aspect Vivid is listed under Global GreenTag certification, with GreenRate Level A certification and a GreenTag Product Health Declaration at PlatinumHEALTH level.
The certification recognises benefits including low VOC emissions, material transparency and the absence of identified toxicity issues of concern. It can also support product selection for rating tools including Green Star, WELL, LEED and the IS Rating Scheme.
Aspect Vivid Soffit Panels in Perth
Get the right system for your project
Westgyp supplies Aspect Vivid to builders, ceiling contractors, estimators and commercial project teams across Perth and regional Western Australia.
Talk to our team about product availability, thickness options, quantities and the supporting components required for your installation.
Frequently Asked Questions
Is Aspect Vivid non-combustible?
The Aspect Vivid core has been tested as non-combustible in accordance with AS 1530.1. The system also has a Group 1 face and a tested Fire Resistance Level of -/60/30 under the applicable test configuration.
Where can Aspect Vivid be installed?
Aspect Vivid is designed for exposed soffits and protected external ceiling areas. Suitability depends on the environment, substrate, fixing method and project performance requirements.
What Aspect Vivid thicknesses are available?
Standard thicknesses are 60mm, 75mm, 100mm and 120mm. Thicker panels provide higher thermal R-values.
What size are Aspect Vivid panels?
Standard panels measure 1200mm × 600mm and feature a 10mm × 5mm bevel around the perimeter.
Does Aspect Vivid help with noise?
Yes. Aspect Vivid provides acoustic absorption that can help reduce reflected sound and reverberation beneath concrete soffits and other hard surfaces. Required acoustic performance should be confirmed against the complete project system.
Is Aspect Vivid suitable for humid conditions?
The product has been tested under high-humidity conditions and recorded a total mass increase of 0.33%. The manufacturer classifies it as highly resistant to humid conditions.
Is Aspect Vivid supplied finished?
Yes. Each panel is fully sealed and pre-finished, with bevelled edges that create a defined ceiling tile appearance.
